Make a Pretty Little Basic Bow
This pretty little basic bow is one every crafter should be able to make. After you learn this you will be adding this bow to everything you make, it is seriously the easiest bow you will ever make.
I am sorry that my glue gun is so dirty in these pictures. I had just finished a moss project and had not cleaned my glue gun. If any of you know how to get the moss off of a glue gun let me know.
Materials:
Wired Ribbon
Cable tie
Hot Glue Gun and a Glue Stick
Scissors
Let’s Get Started on our Pretty Little Basic Bow
The first thing you need to do is to decide how big you want the bow to be. I usually just make a loop and eyeball if it is big enough. Do the same for the other side, then cut the ribbon.
Take your Hot Glue Gun and glue the sides together in the center of the bow.
Decide how long you want the tail to be, and cut a length of ribbon for the tail.
Next put the bow piece on top of the tail piece.
Flip the whole thing over so the bow is on the bottom. Then put the cable tie around both pieces.
Now pull it tight.
Cut a piece of ribbon long enough to wrap around the center cable tie, then fold in the sides and hot glue them down.
Take the piece you just made, and glue the edges to the back of the bow around the tie.
Make a dovetail cut on the bows tails.
Turn it over, open the loops and there you will have your pretty little easy basic bow.
If you like this pretty little basic bow lesson, please share it on Pinterest. While you are here don’t forget to sign up for my newsletter so you don’t miss anything at Good Little Home.
Do you want to make my Topiary Bunny from the picture up top? Click Here.
Till Next Time…